1 1

Make:Kit

Make:Kit Air:Bit

Make:Kit Air:Bit

Air:bit is a Micro: Bit-based drone kit. This makes it easier than ever to get full access to see and modify the drone’s code. From simple block programming to advanced JavaScript algorithms, Air:bit 2 covers it all. Download and print frames or design your own! 

 

Please Note: - The BBC Microbit is NOT included in the sale and must be purchased separately.

 

£128.00 exVAT
£128.00
Sale Sold out
View full details

Product Description

Air:bit is a micro:bit based drone kit. This makes it easier than ever to get full access to see and modify the drone’s code. From simple block programming to advanced javascript algorithms, Air:bit 2 covers it all. Download and print frames or design your own!

Air:bit V2 uses the powerful WonderKit control board and sports a ICM-20602 precision gyroscope and accelerometer, as well as a motor controller, a quick charger and a battery protector circuit. The versatile system allows for modifications such as smart gloves, camera or servo add on or even a lidar collision system. Air:bit V2 is repairable and part of the versatile WonderKit system.

Air:bit V2 needs one micro:bit (V2 recommended) as a main controller, while the remote can be another micro:bit (V1 or V2 both works fine) or an app (iOS or Android).

Whats Included

The Make:Kit Air:Bit is a DIY drone kit that uses micro:bits as the controller and the receiver.

It has the following Technical Details:-

  • Size: 26 x 26 x 6 cm
  • Weight: 100 g (without battery)
  • Battery: 3.7 V 500 mAh LiPo (included)
  • Motors: 4 x 7 mm coreless (2 clockwise, 2 counter-clockwise)
  • Propellers: 4 x 45 mm (2 black, 2 white)
    Frame: Laser-cut plywood

The BBC Micro:Bit is NOT INCLUDED on sale and must be purchased separately here.

  • Control board: Custom PCB with power and motor drivers
  • Sensors: Gyroscope and accelerometer (on micro:bit)
  • Radio: 2.4 GHz (on micro:bit)
  • Code: MakeCode blocks or MicroPython (open source)

Technical Specification

Technical Details:-

  • Size: 26 x 26 x 6 cm
  • Weight: 100 g (without battery)
  • Battery: 3.7 V 500 mAh LiPo (included)
  • Motors: 4 x 7 mm coreless (2 clockwise, 2 counter-clockwise)
  • Propellers: 4 x 45 mm (2 black, 2 white)
    Frame: Laser-cut plywood
  • Control board: Custom PCB with power and motor drivers
  • Sensors: Gyroscope and accelerometer (on micro:bit)
  • Radio: 2.4 GHz (on micro:bit)
  • Code: MakeCode blocks or MicroPython (open source)